Gentle size reduction and delumping
Pharmaceutical Cone Mill
Pharmaceutical cone mill for powder delumping, granule sizing and particle size conditioning in OSD, API and nutraceutical processes.
Short Answer
A pharmaceutical cone mill reduces lumps and sizes powders or granules using selectable screens, impellers and speed settings for process-specific particle conditioning.
Process position
Process Position
The cone mill can be installed before blending, before granulation, after drying or before final compression and packing feed.
Step 1
Feed
Step 2
Screen and impeller milling
Step 3
Discharge
Step 4
Transfer
Step 5
Downstream process
Applications, Benefits And Technical Options
Applications
- Excipient delumping
- API particle conditioning
- Dried granule sizing
- Pre-blend powder preparation
- Nutraceutical powder processing
Key Benefits
- Configurable particle size conditioning
- Compact equipment for line integration
- Screen and impeller changes support process tuning
- Contained feed and discharge options
- Cleanable construction for pharmaceutical use
Technical Options
- Round, grater or application-specific screens
- Impeller profile and speed control options
- Mobile, lift-mounted or through-wall installation
- Vacuum transfer, IBC discharge or gravity feed
- Integrated controls and interlocks
Quotation input
What Information Is Needed For Quotation
A clearer URS and layout package helps the engineering team confirm equipment scope, capacity assumptions, containment expectations and documentation needs.
Product name, powder properties, bulk density, particle size range and flowability notes.
Required capacity per batch or per hour, target transfer distance and elevation.
Process layout, room classification expectations and upstream/downstream equipment interfaces.
Containment, dust extraction, cleaning, material contact and documentation expectations.
Utilities, control preference, automation scope and FAT/SAT/IQ/OQ support requirements.
Ready To Discuss A Powder Handling Project?
Send your URS, layout, BOQ, powder characteristics or required capacity. Our engineer will review the process step and suggest suitable powder handling equipment or a complete processing line concept.
FAQ
Frequently Asked Questions
Can a cone mill be used after a fluid bed dryer?+
Yes. It is often used for dry granule sizing after drying when the granule size distribution needs conditioning.
What information helps select a cone mill?+
Target particle size, feed particle size, capacity, powder behavior, heat sensitivity, containment need and cleaning expectations are key inputs.
Is documentation support available for pharmaceutical projects?+
Documentation support can be included according to project scope, including drawings, material certificates, FAT/SAT records and IQ/OQ support if required.
Related guides
Related Guides
Use these Knowledge Hub articles to compare equipment options, prepare RFQ inputs and connect this page to the wider powder handling process.
Cone Mill vs Hammer Mill
Cone mills are often used for controlled delumping and granule sizing, while hammer mills are used for more aggressive size reduction. Selection depends on target particle size, heat sensitivity, containment and cleaning needs.
Read guideWhat Is Pharmaceutical Powder Handling Equipment?
Pharmaceutical powder handling equipment moves, conditions, weighs, contains and feeds powders between process steps while supporting dust control, cleanability, operator workflow and GMP-oriented documentation.
Read guideHow To Design an OSD Powder Processing Line
An OSD powder processing line should be designed around batch flow, room layout, powder behavior, containment level, cleaning method and interfaces from dispensing through final feed.
Read guide